59US

Other Operations
To exit the menu
Press AMP MENU.
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “RF CHNG”.
In most cases, you will not need to change this
setting.
If “RF CHNG” is set to “RF OFF,” transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
(For EZW-T100A wireless transceiver
only)
1Press AMP MENU.
2Press V/v repeatedly to select
“S-AIR”.
3Press or b to enter the
menu.
4Press V/v repeatedly until “RF
POWER” appears in the front
panel display, then press or
b.
5Press V/v repeatedly to select
the desired setting.
• “HIGH”: Normally select this.
• “LOW”: The RF output power is
decreased.
6Press .
The setting is made.
7Press AMP MENU.
The receiver menu turns off.
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“STBY” to “STBY ON”.
1Press AMP MENU.
2Press V/v repeatedly to select
“S-AIR”.
3Press or b to enter the
menu.
4Press V/v repeatedly to select
“STBY”.
5Press or b to enter the
parameter.
6Press V/v repeatedly to select
the setting you want, then
press .
STBY OFF: You cannot enjoy the
S-AIR receiver while the S-AIR main
unit is in standby mode.
• STBY ON: You can enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode or turned on.

Changing the RF output power

Enjoying the S-AIR receiver

while the S-AIR main unit is in

standby mode

46
78
0
ENTER
9
RETURN/EXIT
TV CH
PRESET
TV CH
+
PRESET
+
REPLAY ADVANCE
AMP MENU
CLEAR
DISPLAY MUTING
MASTER VOL
TV VOL
SOUND
FIELD
.<
<
>
5
TOOLS/
OPTIONS
MENU/HOME
GUIDE
AMP
MENU
,
V,v,B,b
continued