Notes
• Do not press any button on the receiver or supplied remote during autobetical operation.
• If you move to another area, repeat this procedure to store stations in your new area.
• For details on tuning the stored stations, see page 28.
• If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.
Direct tuning
You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote.
1 Press TUNER repeatedly to select the FM or AM band.
The last received station is tuned in.
2 Press D.TUNING.
3 Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz

Receiving Broadcasts

Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (see page 7).

Storing FM stations automatically

(AUTOBETICAL)

(Models of area code CEL, CEK only)

This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals.

If you want to store FM or AM stations one by one, see “Presetting radio stations” on page 27.

1 Press ?/1 to turn off the receiver.

2 Hold down INPUT SELECTOR on the receiver and press ?/1 on the receiver to turn the receiver back on.

“AUTO-BETICAL SELECT” appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area.

For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. For more details on RDS, see page 28. Regular FM stations are assigned

2-character preset codes and stored after the RDS station.

When done, “FINISH” appears in the display momentarily and the receiver returns to the normal operation.

1 b 0 b 2 b 5 b 0

Example 2: AM 1350 kHz

1 b 3 b 5 b 0

If you cannot tune in a station and the entered numbers flash

Make sure you’ve entered the right frequency. If not, repeat steps 2 and 3. If the entered numbers still flash, the frequency is not used in your area.

4 If you’ve tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

5 Repeat steps 1 to 4 to receive another station.

26GB

GB07TUN_HT-SL55.p65

26

28/4/2003, 11:58 AM

HT-SL55 4-247-583-12(1) GB