xAudio input mode for TV/SAT function (TV-XXXX)

Lets you select the audio input mode for TV/SAT function.

•“AUTO” gives priority to digital signals, when there are both digital and analog connections. If there are no digital signals, analog is selected.

•“OPT” specifies the digital audio signals input to the DIGITAL TV/SAT OPT IN jacks.

•“ANLG” specifies the analog audio signals input to the TV/SAT IN (L/R) jacks.

xDecode priority (DEC. XXXX)

Sets the appropriate decoding for incoming digital signals.

•PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM) and DVD. When used with media other than CD or DVD, you may experience noise. If this happens, switch to AUTO mode.

•AUTO mode (DEC. AUTO)

Use to enjoy playback from audio CD (PCM), DVD, DTS-CD and DTS-LD sources. However, with audio CDs, you may not be able to listen the very first moments of each track.

Normally, use as-is with the initial settings above.

Operations Other

31GB

GB08OTR_HT-SL55.p65

31

28/4/2003, 11:58 AM

HT-SL55 4-247-583-12(1) GB