Specifications
Amplifier section
POWER OUTPUT
Models of area code CEL,CEK Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
25 W + 25 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 10 %)
FRONT1): 35 W/ch
CENTER1): 35 W
SURR1): 35 W/ch
Models of other area code
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
20 W + 20 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 10 %)
FRONT1): 30 W/ch
CENTER1): 30 W
SURR1): 30 W/ch
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
Area code | Power requirements |
SP, CEL, CEK | 230 V AC, 50 Hz |
|
|
Frequency response
TV/SAT, DVD, VIDEO: 10 Hz – 50 kHz
Inputs (Analog)
TV/SAT, DVD, VIDEO: Sensitivity: 250 mV Impedance: 50 kilohms S/N3): 96 dB
(A, 250 mV4))
3)INPUT SHORT (with sound field and tone by passed).
4)Weighted network, input level.
Inputs (Digital) |
|
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
DVD, TV/SAT (Optical) | Sensitivity: – |
| Impedance: – |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
Outputs |
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kilohms |
Tone |
|
Gain levels: | ±6 dB, 1 dB step |
Video section |
|
Inputs |
|
Video: | 1 |
Outputs |
|
Video: | 1 |
FM tuner section |
|
Tuning range | 87.5 – 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | |
| 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 |
| ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz |
| |
Selectivity | 60 dB at 400 kHz |
40GB
40 | 28/4/2003, 11:58 AM |