Other Operations

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

After pressing ALT (page 35), press SLEEP while the power is on.

Each time you press the button, the display changes cyclically as follows:

2-00-00 t 1-30-00 t 1-00-00 t 0-30-00

tOFF

The display dim after you have specified the time.

Tip

To check the remaining time before the receiver turns off, press ALT, then press SLEEP. The remaining time appears in the display.

Adjustments using the

SET UP menu

The SET UP menu allows you to make the following adjustments.

1 Press MAIN MENU repeatedly to select

“SET UP ”.

2 Press V or v to select the parameter you want to adjust.

3 Press B or b to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 to 3 until you have set all of the parameters that follow.

Initial settings

Parameter

Initial setting

DVD-XXXX

AUTO

 

 

TV-XXXX

AUTO

 

 

DEC. XXXX

PCM (for DVD),

 

AUTO (for TV/SAT)

 

 

xAudio input mode for DVD function (DVD-XXXX)

Lets you select the audio input mode for DVD function.

•“AUTO” gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.

•“OPT” specifies the digital audio signals input to the DIGITAL DVD OPT IN jacks.

•“COAX” specifies the digital audio signals input to the DIGITAL DVD COAX IN jacks.

•“ANLG” specifies the analog audio signals input to the DVD IN (L/R) jacks.

30GB

GB08OTR_HT-SL55.p65

30

28/4/2003, 11:58 AM

HT-SL55 4-247-583-12(1) GB