Installing the speakers on a flat surface

Before you install the speaker and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below.

Example of HT-SS1000 front speaker

HT-SF1000 only

You need to attach the supplied foot pads to the sub woofer only.

HT-SS1000 only

You need to attach the supplied foot pads to the speakers and sub woofer.

Installing the speakers on the speaker stand

HT-SS1000 only

For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). For details, refer to operating instructions supplied with the speaker stand.

Installing the speakers on the

 

 

 

 

wall

 

Getting

HT-SS1000 only

 

You can install your front and surround

Started

speakers on the wall.

 

1 Prepare screws (not supplied)

 

that are suitable for the hole on

 

the back of each speaker. See

 

the illustrations below.

 

more than 4 mm

more than 25 mm

4.6mm

10 mm

Hole on the back of the speaker

2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm.

5 to 7 mm

continued

13GB