Connecting video components
The following illustration shows how to connect video components such as DVD player, DVD recorder, satellite tuner or VCR.
Satellite tuner
If you connect a DVD recorder
Be sure to change the factory setting of the DVD input button on the remote so that you can use the button to control your DVD recorder. For details, see “Changing button assignments” (page 50).
Started Getting
ANTENNA
U
DIGITAL | OPT IN |
|
A
B
|
| VIDEO 2 | VIDEO 1 |
|
|
|
|
|
| |
AM |
|
| L | L |
|
|
|
|
|
|
|
|
| HDMI | DVD IN | VIDEO 2 IN | MONITOR OUT |
|
|
| |
OPT IN | COAX IN |
| R | R |
|
| – + | – + | – + | – + |
AUDIO IN | AUDIO IN | AUDIO IN |
|
| ||||||
VIDEO 2 | DVD |
|
| FRONT R | FRONT L | SUR R | SUR L |
C 
B
DVD player/ |
|
DVD recorder | VCR |
AOptical digital cord (not supplied) BAudio cord (not supplied)
CCoaxial digital cord (orange) (supplied)
Notes
•You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR.
•To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player.
•When connecting optical digital cords, insert the plugs straight in until they click into place.
•Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
19GB