Connections (Continued)
Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen- ing.
1 | Connect the AM loop antenna to the AM antenna |
connectors. |
2 Connect the FM wire antenna to the FM antenna connectors.
Notes
To prevent noise pickup, keep the AM loop antenna away from the DVD/VCR Receiver and other compo- nents.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as horizontal as possible.
AM loop antenna (supplied)
FM wire antenna (supplied)
Rear of DVD/VCR Receiver
Digital Device Connections
Connect the OPTICAL IN jacks on the DVD/VCR Receiver to the digital audio out (optical) jacks on your digital device (Game device, Digital Set Top Box, etc.), using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN, press INPUT SELECT repeatedly on the remote control until “L1 OPT” appears in the display window.
Notes
If the audio format of the digital output does not match the capabilities of your DVD/VCR Receiver, the DVD/VCR Receiver will produce a strong, distorted sound or no sound at all.
The Optical input function is available only when the other unit’s Sampling Frequency is 32 - 48kHz.
Game Device
Digital Set Top Box
OR
Accessory Audio/Video (A/V)
Connections to DVD/VCR Receiver
Connect the VIDEO 1 or VIDEO 2 jacks on the |
|
DVD/VCR Receiver to the audio/video out jacks on your |
|
accessory component, using optional audio/video | Rear of DVD/VCR Receiver |
cables. |
Jack Panel of Accessory Component (VCR, Camcorder, etc.)
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
| OR |
Rear of | Front of |
DVD/VCR Receiver | DVD/VCR Receiver |
14