Troubleshooting (Continued)

 

Symptom

Cause

 

 

 

Correction

 

 

 

 

 

 

 

 

 

 

 

 

Severe hum or noise is

The plugs and jacks are dirty.

 

 

 

Wipe them with a cloth slightly mois-

 

heard.

 

 

 

 

 

tened with alcohol.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The disc is dirty.

 

 

 

Clean the disc.

REFERENCE

 

 

 

 

 

 

 

 

 

 

 

 

The speakers and components are

 

Connect the speakers and components

 

 

 

 

 

 

connected poorly.

 

 

 

securely.

 

 

 

 

 

 

 

 

 

 

 

 

The DVD/VCR Receiver is located too

 

Move your TV away from the audio

 

 

 

close to the TV.

 

 

 

components.

 

 

 

 

 

 

 

 

 

Radio stations cannot

The antenna is positioned or

connected

 

Connect the antenna securely.

 

be tuned in.

poorly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust the antennas and connect an

 

 

 

 

 

 

 

 

external antenna if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

The signal strength of the stations is too

 

Tune in the station manually.

 

 

 

weak (when tuning in with automatic

 

 

 

 

 

 

 

 

 

 

 

 

 

tuning).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No stations have been preset or preset

 

Preset the stations (see page 38).

 

 

 

stations have been cleared (when

 

 

 

 

 

 

 

tuning by scanning preset stations).

 

 

 

 

 

No sound from OPTI-

DVD/VCR Receiver source is not set to

 

Select L1 OPT by pressing INPUT

 

CAL IN jack.

OPTICAL IN.

 

 

 

SELECT.

 

The remote control

The remote control is not pointed at the

 

Point the remote control at the remote

 

does not work properly.

remote sensor of the DVD/VCR

 

 

sensor of the DVD/VCR Receiver.

 

 

 

Receiver.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is an obstacle in the path of the

 

Remove the obstacle.

 

 

 

remote control and the DVD/VCR

 

 

 

 

 

 

 

Receiver.

 

 

 

 

 

 

 

 

 

The batteries in the remote control are

 

Replace the batteries with new ones.

 

 

 

 

 

 

 

 

 

 

 

exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This remote control uses same buttons

 

When using a VIDEO, first press the

 

 

 

 

VIDEO button. When using a DVD, first

 

 

 

for VIDEO and DVD (ex. H (PLAY)).

 

 

 

 

 

press the DVD button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Moisture Condensation

 

 

 

 

 

 

 

 

 

Moisture condensation can occur:

 

In locations where moisture condensation may occur:

 

 

 

 

 

 

 

 

When the DVD/VCR Receiver is moved from a cold

 

Keep the DVD/VCR Receiver plugged into an AC

 

 

place to a warm place.

 

 

 

power outlet with POWER On. This will help prevent

 

Under extremely humid conditions.

 

 

condensation.

 

 

 

 

 

 

 

 

 

 

 

 

 

When condensation has occurred, wait a few hours

 

 

 

 

 

 

for the DVD/VCR Receiver to dry before using it.

 

 

 

 

 

 

 

 

 

 

 

 

Video Head Cleaning

The dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might.

43