Troubleshooting (Continued)
Symptom | Cause | Correction | ||
|
|
|
| |
Some channels are | Those channels were deleted with the | Use CH. ADD/DEL option on the TUN- | ||
skipped over when using | CH. ADD/DEL option. | ING menu to restore channels. See | ||
| “Channel Selection” on page 18. | |||
|
|
|
| |
Picture and sound of | Antenna or cables are loose. | Tighten connections or replace cable. | ||
broadcasting channel are |
|
|
| |
weak or missing. |
|
|
| |
Wrong CHANNEL SOURCE option is | Try all CHANNEL SOURCE options. | |||
| ||||
| being used. | See “Channel Selection” on page 18 for | ||
|
| details. | ||
|
|
|
| |
Camcorder image is not | Camcorder is off. | Turn camcorder on and operate | ||
shown. |
| properly. | ||
|
|
|
| |
Camcorder image via | DVD/VCR Receiver INPUT SELECT is | Use INPUT SELECT to select LINE | ||
A/V input to DVD/VCR | not set to LINE1(L1) or LINE2(L2). | input channel (LINE1(L1) or LINE2(L2)). | ||
Receiver is not shown on |
|
|
| |
TV screen. |
|
|
| |
Timer recording is not | Clock in DVD/VCR Receiver is not set | Set clock to correct time. See “Setting | ||
possible. | to correct time. | the Clock” on page 19. | ||
|
|
| ||
| Timer has been programmed | Reprogram Timer. See “Timer | ||
| incorrectly. | Recording” on pages 25 and 26. | ||
|
|
| ||
| TIMER indicator light does not appear | Reprogram Timer and turn DVD/VCR | ||
| after programming timer. | Receiver off to enable timer. | ||
|
|
| ||
Stereo Audio Record | TV is not | No action is possible. | ||
and/or Playback is not |
|
|
| |
Broadcast program is not in stereo for- | No action is possible. | |||
present. | ||||
mat. |
|
| ||
|
|
| ||
|
|
| ||
| DVD/VCR Receiver A/V Out jacks are | Make A/V connections. Stereo is | ||
| not connected to TV A/V In jacks. | available only via A/V output from | ||
|
| DVD/VCR Receiver. | ||
| DVD/VCR Receiver Audio/Video Out is | Select A/V source as TV input. | ||
| not selected for viewing at the TV. |
|
| |
|
|
| ||
| DVD/VCR Receiver BROADCAST | Set BROADCAST TYPE mode to | ||
| TYPE mode is set to SAP or MONO. | STEREO. See “Using the VIDEO Setup | ||
|
| Menu” on page 18. | ||
|
|
|
| |
42