Troubleshooting
Check the following guide for the possible cause of a problem before contacting service. |
| |||
|
|
|
|
|
Symptom | Cause | Correction |
| |
|
|
|
|
|
No power. | The power cord is disconnected. | Plug the power cord into the wall outlet |
| |
|
| securely. | REFERENCE | |
|
|
|
| |
The power is on, but the | No disc is inserted. | DVD/VCR Receiver appears on the TV | ||
Insert a disc or tape. (Check that the |
| |||
DVD/VCR Receiver | No tape is inserted. | disc or tape indicator in the display |
| |
does not work. |
| window is lit.) |
| |
No picture. | The TV is not set to receive DVD/VCR | Select the appropriate video input mode |
| |
| Receiver signal output. | on the TV so the picture from the |
| |
|
| screen. |
| |
|
|
|
|
|
| TV/VIDEO mode for DVD/VCR Receiver | Press the TV/VIDEO button on the |
| |
| remote control repeatedly to select |
| ||
| is set to TV MODE. |
| ||
| VIDEO mode. VCR MODE appears in |
| ||
|
|
| ||
|
| the display window. |
| |
|
|
|
|
|
| The video cable is not connected | Connect the video cable securely. |
| |
| securely. |
|
|
|
|
|
|
|
|
| The connected TV power is turned off. | Turn on the TV. |
| |
|
|
|
|
|
| The equipment connected with the | Select the correct input mode on the |
| |
No sound. | audio cable is not set to receive | audio receiver so you can listen to the |
| |
| DVD/VCR Receiver signal output. | sound from the DVD/VCR Receiver. |
| |
| The audio cables are not connected | Connect the audio cable securely. |
| |
| securely. |
|
|
|
|
|
|
|
|
| The power of the equipment connected | Turn on the equipment connected with |
| |
| with the audio cable is turned off. | the audio cable. |
| |
|
|
|
|
|
| The audio connecting cord is damaged. | Replace it with new one. |
| |
|
|
|
|
|
The playback picture is | The disc is dirty. | Clean the disc. |
| |
poor. |
|
|
|
|
Tape heads are dirty. | Clean video heads. |
| ||
|
| |||
| Tape is a rental or was recorded on | Use |
| |
| another VCR. | ing adjustment while tape is playing. |
| |
|
|
|
|
|
The DVD/VCR Receiver | No disc is inserted. | Insert a disc or tape. (Check that the |
| |
does not start playback. | No tape is inserted. | disc or tape indicator in the display |
| |
|
| window is lit.) |
| |
|
|
|
| |
| An unplayable disc is inserted. | Insert a playable disc. (Check the disc |
| |
|
| type, color system, and Regional code.) |
| |
|
|
|
| |
| The disc is placed upside down. | Place the disc with the playback side down. |
| |
|
|
|
| |
| The disc is not placed within the guide. | Place the disc on the disc tray correctly |
| |
|
| inside the guide. |
| |
|
|
|
| |
| The disc is dirty. | Clean the disc. |
| |
|
|
|
| |
| The Rating level is set. | Cancel the Rating function or change |
| |
|
| the rating level. |
| |
|
|
|
|
|
41