Playing the Radio

Manual Tuning

1Press RADIO ON/BAND [RADIO/BAND] to turn on the radio.

“RADIO” appears in the Clock Display Window. The display shows the band and frequency for a few seconds and then changes back to the current time.

2Press RADIO ON/BAND [RADIO/BAND] repeatedly to select the desired band.

Each press changes the band as follows:

3Press RADIO TUNE/TIME SET – , m(Fast reverse) or +, M(Fast forward) [TUNE/CH – or +] to tune in to the desired station.

Two short beeps sound when the minimum frequency of each band is received during tuning.

4Adjust the volume using VOLUME [VOL] + or –.

To check the station being received

Press RADIO ON/BAND [RADIO/BAND] lightly. The Clock Display Window shows the band and frequency for a few seconds and then changes back to the current time.

To turn off the Radio

Press OFF.

Switching between monaural and stereo

The radio is set for stereo reception at the default setting. If FM stereo reception is poor, set to “FM MONO (monaural).” Noise will be reduced although the sound will not be heard in stereo.

1Press RADIO ON/BAND [RADIO/BAND] to turn on the radio.

2Press RADIO ON/BAND [RADIO/BAND] repeatedly to select FM.
3Press MODE/SCREEN SIZE.

“Mono(monaural)” or “ST(Stereo)” appears in the Clock Display Window. Each time you press MODE/SCREEN SIZE, the mode changes to either “Mono” or “ST.”

4Select Mono or ST.

The mode you select appears in the Clock Display Window for a few seconds and returns to the current time.

15