Before Installation

The unit should be installed in an area with good reception.

Improving the Reception

FM: The AC power cord functions as an FM antenna.

Extend the AC power cord fully to improve FM reception.

AM: When installing the unit, rotate the unit horizontally for optimum reception and then install the unit. A ferrite bar antenna is built into the unit.

Installing the Unit Under a Cabinet

The unit can be installed without the spacer.

1Mark the position of the 4 holes by using the supplied template. Use a drill to make the holes (diameter size-6.5 mm dia., 9/32 inch).

Template

2When the cabinet door overhangs the shelf and obstructs the unit, you can adjust the unit/shelf height.

First set the L mark to the dot which becomes the lowest position, then you can adjust the height in 4 steps (H••L) by turning the spacer counterclockwise.

Spacer

L (Low)

Dot

8