Preparing for the initial
parental setting - LEVEL
Playback of some DVDs can be limited according to a predetermined level, such as the age of the viewer. The Parental control function allows you to set a playback limitation level.
This setting is available while playback is stopped and the resume function is canceled.
1Press SETUP , then press b or B button repeatedly until “PARENTAL SETUP” appears on the screen.
2Press ENTER.
3Press v or V button repeatedly to select “Level”, then press ENTER.4Press v or V button repeatedly to select the limitation level, then press ENTER.
5Enter the password and press ENTER. (Only when the PARENTAL CONTROL is set to ON.)
6Press SETUP to exit the Setup Menu.Refer to the following table. Parental levels of the table are on the MPAA (Motion Picture Association of America) rating system. If you set this player to level “4” for example, DVDs with levels “5”, “6”, ‘7", and “8” cannot be played.
| This Player | MPAA Rating System |
“1” | “G”: General audience |
“2” | – |
“3” | “PG”: Parental guidance |
| suggested |
“4” | “PG13”: Parents strongly |
| cautioned |
“5” | – |
“6” | “R”: Restricted |
“7” | “NC17”: No one 17 and under |
| admitted |
“8” | No restriction |
The factory setting is “8.”
Monitoring video signals input from a connected device
Switch the input channel to monitor video signals input from the device connected to the VIDEO INPUT connector of the player.
1Press AUX.2Adjust the volume using VOLUME [VOL] + or29