59GB
Table of
contents Sample photo Menu Index
Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and

aperture.

• Yo u cannot select [Flash Off] and [Autoflash] in [Fl ash Mode]. When you want to fire the flash, raise the
flash by pressing (Flash pop-up) button. When you do not fire the flash, push down the flash.
• The (SteadyShot warning) indicator doe s not appear in manual exposure mode.
• The ISO setting [ISO AUTO] is set to [ISO 100] in manual exposur e mode. Set the ISO sensitivity as
necessary.
• The brightness of the image on the LCD screen may differ fro m the actual image being shot.
• When using an A-mount lens (sold separately), you can adjust the shutter speed and aperture when
focusing manually during movie recording.
• If yo u shoot an image using the camera’s fastest shutter speed, the screen may display uneven exposure,
depending on the shooting conditions. To avoid uneven exposure, change th e shooting conditions (shift
the shutter speed one step lower, etc.) before shooting.

1Set the shooting mode to (Manual Exposure).

2Select the shutter speed or aperture value

by pressing the bottom of the control wheel.

Each time you press the bottom of the control wheel, it
switches between the shutter speed and aperture value.
Shutter speed

3Turn the control wheel to select shutter

speed/aperture value.

Check the exposure value at “MM” (metered manual).
Toward +: Images become brighter.
Toward –: Images become darker.
0: Appropriate exposure analyzed by the camera Aperture (F-value)

4Adjust the focus and shoot the subject.

You can adjust the shutter speed and aperture value also
during movie recording.
Metered manual
Notes
Continued r