Sony JAX-S8 manual Timer Operations, Sleep timer, Timer playback

TIMER OPERATIONS

POWER

STANDBY / ON

En

POWER

ENTER

MULTI JOG

VOLUME	ENTER
CLOCK/TIMER/
SELECT	SLEEP
CLOCK/TIMER/
SET
Deck B	VOLUME
CLEAR
	+,–

5Press r or t to set the timer-on minute and then press ENTER.

“OFF” appears for a moment.

6Repeat step 4 and 5 to set the timer-off hour and minute.

7Press r or t to select the source (CD, TAPE and TUNER) and then press ENTER.

8Press POWER to turn the unit off.

The unit turns on at the specified timer-on time and plays the selected source and then turns off at the specified timer-off time.

•To stop timer setting in step 3 to 6, press CLEAR on the remote.

Sleep timer

Turns off the unit automatically after a specified time.

Press SLEEP on the remote repeatedly.

With each press, the timer duration changes cyclically as follows:

“AUTO”* “90” “80” - - - “10” “OFF”

The unit turns off after the selected time.

*“AUTO”: The unit turns off when the current CD or tape finishes the playback (for up to 100 minutes).

Tip:

The display is dimmed while the sleep timer is active.

To check the remaining time until the unit turns off Press SLEEP on the remote once. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP on the remote repeatedly until “SLEEP OFF” appears.

Timer playback

Turns on the unit at a specified time every day. Make sure the clock is set correctly.

Use the remote from step 2.

1Prepare the source.

To play CD(s), load disc(s).

To play the radio, select the band and tune in to the desired station or tune in to a preset station (see “Tuning in to preset stations”).

To play a tape, insert the tape and select the deck.

2Press VOLUME +, -to set the volume level.

3Press CLOCK/TIMER/SET to display “DAILY” and then press ENTER.

“5” indicator lights up and “ON” appears for a moment. If “SET CLOCK” is displayed, set the clock (see “Setting the clock”) and carry out from this step again.

4Press ror tto set the timer-on hour and then press ENTER.

•The Timer playback will not begin unless the unit is turned off first.

•Turning VOLUME on the unit is also available in step 2. •MULTI JOG is also available in place of ror t.

To display the timer setting

Press CLOCK/TIMER/SELECT on the remote, then press r or tto select “DAILY” and press ENTER. The timer-on time, the timer-off time and the source are displayed.

To change the timer setting

Re-set the timer again.

To cancel the timer

Press CLOCK/TIMER/SELECT on the remote, then press r or tto select “OFF” and press ENTER. “5” disappears from the display.

22