
Choosing a Timer function
You cannot use both Timer playback and Timer recording at the same time. If both have been set, choose one or the other. 1 Press CLOCK/TIMER/SELECT on the remote.
“SELECT” is displayed.
2 Press ror tto select “DAILY” (Timer playback) or “REC” (Timer recording) and press ENTER.
Timer recording
Turns on the unit and makes recording once at a specified time. Timer recording is available only for TUNER source.
Use the remote from step 3.
1Prepare the TUNER source.
Select the band and tune in to the desired station or tune in to a preset station (see “Tuning in to preset stations”).
2Prepare the recording destination. Insert the recordable tape in deck B.
3Press CLOCK/TIMER/SET to display “DAILY”.
If “SET CLOCK” is displayed, set the clock (see “Setting the clock”) and carry out from this step again.
4Press r or t repeatedly until “REC” appears in the display and then press ENTER. “REC 5” indicator lights up and “ON” appears for a moment.
5Carry out step 4 to step 6 described in “Timer playback” to set the
6Press POWER to turn the unit off.
The unit turns on at the specified
•To stop timer setting in step 3 to 4, press CLEAR on the remote.
•The Timer recording will not begin unless the unit is turned off first.
•Volume level is automatically set to 0 (minimum) when the Timer recording is activated.
•MULTI JOG is also available in place of ror t.
To display the timer setting
Press CLOCK/TIMER/SELECT on the remote, then press r or t to select “REC” and press ENTER. The
To change the timer setting
To cancel the timer
Press CLOCK/TIMER/SELECT on the remote, then press r or tto select “OFF” and press ENTER. “REC 5” disappears from the display.
Choosing a Timer function
You cannot use both Timer playback and Timer recording at the same time. If both have been set, choose one or the other. 1 Press CLOCK/TIMER/SELECT on the remote.
“SELECT” is displayed.
2Press ror tto select “DAILY” (Timer playback) or “REC” (Timer recording) and press ENTER.
Notes |
|
•The Timer playback performs every day at the specified time |
|
unless you cancel it. However, the Timer recording performs |
|
only once: it automatically cancels itself when the recording |
|
finishes. |
|
•You cannot set the same time for |
|
off time. “TIME NG” is displayed if you do that. In this |
|
case, reset the time. |
|
•You cannot select the Timer playback/recording with |
|
CLOCK/TIMER/SELECT on the remote before setting it up. |
|
“SET TIMER” is displayed if you do that. You must set it |
|
up first and then select it. |
|
•When you use the sleep timer, the timer playback/recording |
|
will not turn on the unit until the sleep timer turns it off. | En |
|
23