Viewing Pictures from Connected Equipment

Turn on the connected equipment, then perform the following operation.1Press .2Press F/f to select the desired input source, then press .

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment. The picture from the connected equipment appears on the screen.

For an auto-tuned VCR

In analogue mode, press PROG +/– or the number buttons, to select the video channel.

To view two pictures simultaneously– PAP (Picture and Picture)

You can view two pictures (external input and TV programme) on the screen simultaneously.

~

•This function is not available for a PC input.

1 Press OPTIONS.2 Press F/f to select “PAP”, then press .

The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right.

3Press the number buttons or PROG +/– to select the TV channel.

To return to single picture mode

Press RETURN.

To view two pictures simultaneously

– PIP (Picture in Picture)

You can view two pictures (external input and TV programme) on the screen simultaneously.

1Press OPTIONS.2Press F/f to select “PIP”, then press .

The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen.

You can use F/f to change the position of the TV programme screen.

3Press the number buttons or PROG +/– to select a TV channel.

To return to single picture mode

Press RETURN.

z

•You can switch the audible picture by pressing G/ g.

24 GB