Sony 52 GB, Sound, screen, • Press, Channels, channels, on the TV, in your area, Home Network, pay TV service, Check Settings, playback fails, –Restartthe PC

Condition	Explanation/Solution
No picture from the connected	• Turn the connected equipment on.
equipment appears on the	• Check the cable connection.
screen.	• Press	to display the list of inputs, then select the desired input.

•Correctly insert the memory card or other storage device in the digital still camera.

•Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera.

•Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played.

You cannot select the	• Check the cable connection.
connected equipment on the	• Set the server to be displayed on the Home Menu (page 31).
Home Menu or you cannot
switch the input.

Sound

The picture is good, but there is no sound.

•Press 2 +/– or % (Mute).•Check if the “Speaker” is set to “TV Speaker” (page 38).

•When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

Channels

	You cannot select your	• Switch between digital and analogue mode, and select the desired
	desired channel.	digital/analogue channel.
	Some channels are blank.	• The channel is for scrambled/subscription service only. Subscribe to a
		pay TV service.
		• The channel is used only for data (no picture or sound).
		• Contact the broadcaster for transmission details.
	You cannot view digital	• Contact a local installer to find out if digital transmissions are provided
	channels.	in your area.
		• Upgrade to a higher gain aerial/antenna.
Home Network
	Connection diagnostic results	Check Connections
	indicate a failure.	• Use a straight cable for the LAN cable.
		• Check if the cable is connected firmly.
		• Check the connection between the TV and the router.
		Check Settings
		• Change the IP address for the DNS server (“Checking the Network
		Connection” (page 31)) while referring to the following.
		–Contact your Internet service provider.
		–Specify the IP address of the router if you do not know the DNS of
		your Internet service provider.

The server cannot be found, a • Once server settings are changed, turn the TV off and on by pressing 1

list cannot be retrieved, and	on the TV.
playback fails.	• Execute “Server Diagnostics” (page 31).
	When using a PC as the server
	• Check if the PC is turned on. Do not turn off the PC while accessing.
	• If security software is installed on the PC, be sure to allow connections
	from external devices. For details, refer to the manual supplied with your
	security software.
	• The load on the PC may be too high or the server application may
	become unstable. Try the following:
	–Stop the server application and restart it.
	–Restart the PC.
	–Reduce the number of applications running on the PC.
	–Reduce the amount of content.

52 GB