Using BRAVIA Sync with Control for HDMI

The Control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control).

For example, by connecting Sony equipment that is compatible with Control for HDMI (with HDMI cables), you can control them together.

Be sure to connect the equipment correctly, and make the necessary settings.Control for HDMI

•Automatically turns the connected equipment off when you switch the TV to standby mode using the remote.

•Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play.

•If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system.

•Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system.

•You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing:

–m/N/X/M/x to operate the connected equipment directly.

–SYNC MENU to display the menu of the connected HDMI equipment on the screen.

After displaying the menu, you can operate the

menu screen by using F/f/G/g, , colour buttons,

and RETURN.

–OPTIONS to display “Device Control”, then select options from “Options” and “Content List” to operate the equipment.

–Refer to the instruction manual of the equipment for available control.

•If “Control for HDMI” of the TV is set to “On”, “Control for HDMI” of the connected equipment is also automatically switched to “On”.

To connect the equipment that is compatible with Control for HDMI

Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) jack of the TV and the audio system using an optical audio cable (page 22).

To make the Control for HDMI settings

The Control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” (page 40) for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment.

Equipment Optional Using

27 GB