Programme Sorting Changes the order of analogue channels stored in the TV.

1 Press F/f to select the channel you want to move to a new position, then press

 

2

.

 

 

 

Press F/f to select the new position for the channel, then press .

 

 

Programme Labels

Assigns a channel name of your choice, up to five letters or numbers. The name

 

appears briefly on the screen when you select the channel. (Names for channels are

 

usually taken automatically from Text (if available).)

 

1

Press F/f to select the channel you want to name, then press .

 

2 Press F/f to select the desired letter or number (“_” for a blank space), then

 

 

press g.

 

 

 

 

If you enter a wrong character

 

 

Press G/g to select the wrong character. Then, press F/f to select the correct

 

 

character.

 

 

 

3 Repeat step 2 until you finish entering the name.

 

4

Press to exit the labeling procedure.

 

 

Intelligent Picture

On with Indicator Automatically reduces the picture noise. The signal level bar

 

 

 

is displayed when the channel is changed or the display is

 

 

 

changed from an input screen to a TV programme.

 

 

 

 

 

On

 

Automatically reduces the picture noise.

 

 

 

 

 

Off

 

Turns off the “Intelligent Picture” feature.

 

 

Manual Programme

To preset a channel, press PROG +/– to select the programme number, before

Preset

selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You

 

cannot select a programme number that is set to “Skip” (page 42).

 

 

 

 

Programme/

Allows you to preset programme channels manually.

 

System/Channel

1

Press F/f to select “Programme”, then press .

 

 

 

2 Press F/f to select the programme number you want to

 

 

 

 

manually tune (if tuning a VCR, select channel 00), then

 

 

 

3

press .

 

 

 

Press F/f to select “System”, then press .

 

 

 

4 Press F/f to select one of the following TV broadcast

 

 

 

 

systems, then press .

B/G: For western European countries/areas

I:For the United Kingdom

D/K: For eastern European countries/areas

L:For France

5 Press F/f to select “Channel”, then press .

6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.

7 Tune the channels as follows:

If you do not know the channel number (Frequency)

Press F/f to search for the next available channel. The search stops when a channel is found. To continue searching, press F/f.

If you know the channel number (Frequency)

Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your VCR.

8 Press to jump to “Confirm”, then press .

Repeat the above procedure to preset other channels manually.

Functions Menu Using

(Continued) 41 GB