Using USB photo viewer

You can view photographs (in JPEG format) stored in a Sony digital still camera, camcorder or USB storage media on your TV.

1 Connect a supported USB device to the TV.

2 Press MENU.

3 Press F/f to select “Photo”, then press .

The thumbnail screen appears.

4 Press F/f/G/g to select the photograph or folder you want to view, and then press .

If you want to view a slide show, press G/f to select “Slide Show”, then press .

Advanced operations

Press G/f to select an option, then press .

Options

Description

Device Selection

Select the device if multiple

 

devices are connected.

 

 

Picture Settings

You can make “Backlight”

 

(page 27), “Picture” (page 27)

 

and “Colour Temperature”

 

settings.

 

 

Set-up

You can make advanced settings

 

for the slide show and set the

 

display sequence for the

 

thumbnails.

~

•USB photo viewer only supports DCF-compliant JPEG photographs.

•Set the camera’s USB connection mode to Auto or “Mass Storage” mode when you are connecting Sony digital still camera. For more information about USB connection mode, see the instructions supplied with the device that you use.

•Do not turn off the TV or connected USB device, or disconnect the USB cable or remove the recording media while the data on the recording media is being accessed. The data on the recording media may be damaged.

•Using unsupported USB device is not guaranteed and may cause malfunctions.

•Sony cannot be held liable for any damage to or loss of data on the recording media due to a malfunction of any connected devices or the TV.

•Check the website below for the up to date information about compatible USB devices. http://www.sony-asia.com/bravia/flash.html

Using HDMI control

The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI.

You can connect Sony HDMI control compatible equipment such as TVs, hard disk DVD recorders and audio systems (with HDMI cables) to let them work integratedly.

Be sure to correctly connect and set the compatible equipment to use the HDMI control function.

To connect the HDMI control compatible equipment

Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) jack of the TV and the audio system using an optical audio cable. For details, see page 18.

To make the HDMI control settings

HDMI control must be set on both the TV side and the connected equipment side. See “HDMI Set-up”on page 37 for the TV side settings. See the operating instructions of the connected equipment for setting details.

HDMI control functions

•Turns the connected equipment automatically off when you turn the TV off.

•Turns the TV on and automatically switches the input to the connected equipment when the equipment starts to play.

•If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system.

•Adjusts the volume and mutes the sound of a connected audio system.

Equipment Optional Using

25 GB