Set-up menu
You can select the options listed below on the “Set- up” menu. To select options in “Settings”, refer to “Navigating through menus” (page 26).
Timer Settings | Sets the timer to turn on/off the TV. |
| Sleep Timer |
| Sets a period of time after which the TV automatically switches itself into standby |
| mode. |
| When “Sleep Timer” is activated, the (Timer) indicator on the TV front panel |
| lights up in orange. |
| z |
| • If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”. |
| • A notification message appears on the screen one minute before the TV switches to standby |
| mode. |
| On Timer |
| Sets the timer to turn on the TV from standby mode. |
| “Day”: Selects the day on which you want to activate the “On Timer”. |
| “Time”: Sets the time to turn on the TV. |
| “Duration”: Selects the time period after which the TV automatically switches to |
| standby mode again. |
| “Volume |
| Clock Set |
| Sets the clock using the following menu selections in “Time Adjustment”. |
| “Auto”: The clock is set automatically when a digitally broadcast time signal is |
| received. |
| “Manual”: Sets the clock manually when digital channels have not been stored, or |
| when you cannot receive the time correctly. Set the “Day” and “Time”. |
|
|
Video Labels | Assigns a name to any equipment connected to the side and rear jacks. The name will |
| be displayed briefly on the screen when the equipment is selected. You can skip input |
| signals from connected equipment that you do not want displayed on the screen. |
| 1 Press F/f to select the desired input source, then press . |
| 2 Press F/f to select the desired option below, then press . |
| Equipment labels: Uses one of the preset labels to assign a name to connected |
| equipment. |
| “Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” |
| |
| “Skip”: Skips an unnecessary input source. |
|
|