3 Press F/f/G/g to select the state/region in which you will operate the TV, then press 
.
This option allows you to set the time zone in which you will operate the TV. This will ensure that the time displayed on the
Auto-tuning the TV
4 Press F/f to select “Full Scan” or “Quick Scan” to preset channels, then press 
.
“Full Scan”: All available channels are tuned and stored. This procedure may take some time. “Quick Scan”: All expected channels in your area are tuned and stored. You will need to select your nearest city to help speed up this procedure.
5 Press G/g to select “OK”, then press 
.
A display appears showing a tuning progress bar and the channels tuned and stored.
The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, please be patient and do not press any buttons on the TV or remote.
If a message appears for you to confirm the antenna connectionNo digital or analogue channels were found. Check the antenna connection and press G/g to select “Yes”, then press 
to start
6 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 39).
If you do not change the order in which the analogue channels are stored on the TV, go to step 7.
7 Press MENU to display the Clock Set menu.
When digital channels have been stored, set “Time Adjustment” to “Auto”, then go to step 9. If no digital channels have been stored, set “Time Adjustment” to “Manual”, then go to next step.
8 Press F/f/G/g to set the day and time (hour and minute), then press 
.
9 Press MENU to exit.
The TV has now tuned in all the available channels.
10Press G/g to select the desired setting in “Display this menu next time ?” dialogue, then press 
to exit.
z
If “Yes” is selected and the TV is turned off by pressing 1 on the TV, or is disconnected from the AC power outlet, the auto
Guide