Safety information
Installation/Set-up
Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.
Installation•The TV set should be installed near an easily accessible AC power outlet.
•Place the TV set on a stable, level surface.
•Only qualified service personnel should carry out wall installations.
•For safety reasons, it is strongly recommended that you use Sony accessories, including:
–
30 cm
10 cm 
10 cm
10 cm
Leave at least this space around the set.
Installed with stand
|
|
|
|
| 30 cm |
| |||
10 cm |
|
|
|
|
| 10 cm | 6 cm | ||
|
|
|
|
| |||||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
•Before transporting the TV set, disconnect all cables.
•Two or three people are needed to transport a large TV set.
•When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel and the frame around the screen.
•When lifting or moving the TV set, hold it firmly from the bottom.
•When transporting the TV set, do not subject it to jolts or excessive vibration.
•When transporting the TV set for repairs or when moving,
pack it using the original carton and packing material.
40XBR/40X3100
Leave at least this space around the set.
•To ensure proper ventilation and prevent the collection of dirt or dust:
–Do not lay the TV set flat, install upside down, backwards, or sideways.
–Do not place the TV set on a shelf, rug, bed or in a closet.
–Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.
–Do not install the TV set as shown below.
Air circulation is blocked.
WallWall
AC power cord
Handle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or
•Never cover the ventilation holes or insert anything in the cabinet.
•Leave space around the TV set as shown below.
•It is strongly recommended that you use a Sony wall- mount bracket in order to provide adequate
damage and/or injuries:
–Connect the TV set using a
–Use only Sony AC power cords, not those of other brands.
–Insert the plug fully into the AC power outlet.
–Operate the TV set on a
–When wiring cables, be sure to unplug the AC power cord for your safety and take care not to catch your feet on the cables.
–Disconnect the AC power cord from the AC power outlet before working on or moving the TV set.
–Keep the AC power cord away from heat sources.
–Unplug the AC power plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.
Continued