Sony 3-217-284-12(1), KDL-52X3100, KDL-52XBR 37 GB, HDMI Set-up, Auto S Video, Power Saving, Light Sensor, Auto Start-up, Logo Illumination, Product Information, Functions Menu Using, “On”:, Auto TV On

Auto S Video	Selects the input signal from S video jacks	1 or 2 when	/	1 or 2 jacks are
	both connected.
	“On”: Switches automatically between the S video jack and the composite video
	jacks depending on the cable connection.
	“Off”: Activates the composite video jacks.
HDMI Set-up	This is used to set the HDMI control compatible equipment connected to the HDMI
	jacks. Note that the link setting must also be made on the side of the HDMI control
	compatible equipment that is connected.
	HDMI Control
	Sets whether or not to link the operations of the HDMI control compatible equipment
	and the TV. When set to “On”, the following menu items can be performed.
	Auto Devices Off
	When this is set to “On”, any connected HDMI control compatible equipment will
	be turned off with the TV.
	Auto TV On
	When this is set to “On”, the TV turns on when any connected HDMI control
	compatible equipment is turned on.
	HDMI Device List
	Displays the connected HDMI control compatible equipment.
	~
	You cannot use “HDMI Control” if the TV operations are linked to the operations of an audio
	system that is compatible with HDMI control.
Auto Start-up	Starts the initial set-up to tune in all available digital and analogue channels and set
	the time.
	Usually, you do not need to do this operation because channels already tuned when
	the TV was first installed (page 6).
	However, this option allows you to repeat the process (e.g. to retune the TV after
	moving house, or to search for new channels that have been launched by
	broadcasters).
Power Saving	Selects the power saving mode to reduce the power consumption of the TV.
	When “Picture Off” is selected, the picture is switched off and the			(Picture Off)
	indicator on the TV front panel lights up in green. The sound remains unchanged.
Light Sensor	“On”: Automatically optimises the picture settings according to the ambient light in
	the room.
	“Off”: Turns off the “Light Sensor” feature.
	~
	Be sure not to put anything over the sensor, as its function may be affected. See page 13 for
	further information on the sensor.
Logo Illumination	Lights up and turns off the Sony logo on the front of the TV.
PC Power Management	Switches the TV to standby mode if no signal is received for 30 seconds in the PC
	input.
Product Information	Displays your TV’s product information.

Functions Menu Using

Continued

37 GB