Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 40).
Programme/TV System
Presets programme channels manually.
1Press F/f to select “Programme”, then press .
2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press .
3Press F/f to select “TV System”, then press .
4Press F/f to select the best received TV broadcast systems, then press .
5Press F/f to select “VHF Low”, “VHF High” or “UHF” then press .
6Press G/g until the desired channel’s broadcast appears on the TV screen, then press .
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of “Programme Labels” (page 39).
AFT
Allows you to
You can adjust the fine tuning over a range of
Audio Filter
Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a
If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”.
~
You cannot receive stereo or dual sound when “Low” or “High” is selected.
Skip
Skips unused analogue channels when you press PROG +/– to select channels. (You can still select a skipped channel using the number buttons.)
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or “NTSC4.43”) according to the channel.
Signal Level
Displays the signal level for programme currently being watched.