Sony KDL52V4100 Connecting the TV, Shown with HDMI Connection, Cable or VHF/UHF or VHF only

3. Connecting the TV

You can enjoy high-definition and standard- definition digital programming (if available in your area) along with standard-definition analog programming.

•This TV is capable of receiving unscrambled digital

programming for both cable (QAM and 8VSB) and

external VHF/UHF antenna (ATSC).

•It is strongly recommended that you connect the

CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio

frequency interference, resulting in signal degradation.

You can enjoy high-definition programming by

subscribing to a high-definition cable service or a

high-definition satellite service. For the best possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input on the back of your TV.

Shown with HDMI Connection

Rear of TV

Cable or VHF/UHF (or VHF only)

75-ohm	coaxial
cable	_	_	Rear of TV

CABLE/ANTE N NA

Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna

programming, as indicated below.

		A-B		RF switch
		_			Rear of TV
Cable	_	_	m	_ __	_
Antenna	__				CABLE/ANTENNA

•Be sure to set the Signal Type setting to Cable or Antenna in the Channel settings for the type of input signal you choose (see page 37).

cable

		CATV/Satellite
		cable
HD	cable box/	Ilantenna
HD	satellite box
		m
		_---]
		+,

[ 2

12