Sony KDL52V4100 operating instructions Installing the TV

1.Installing the TV

This TV can be mounted on a wall using a Wall- Mount Bracket or placed on a TV stand (each sold separately). This section will explain:

•How to carry the TV

•Preparation for a Table-Top stand

•Preparation for a Wall-Mount Bracket

•Installation against a wall or enclosed area

•Bundling the connecting cables

•Securing the TV

Be sure to follow these guidelines to protect your property and avoid causing serious injury.

•Before carrying the TV, disconnect all cables.

•Carrying the large size TV requires two or more people.

•When carrying the TV, place your hand as illustrated and hold it securely. Do not subject the TV to shocks, vibration, or excessive force.

Follow the assembling steps required to place on a

TV stand (except models: KDL-52V4100 and KDL-52W4100).

1Remove the Table-Top Stand and screws from the carton. The screws can be found in the accessory bag.

Table-Top

Stand

2Place the Table-Top Stand on a level and stable surface.

\	3	Gently slide the TV unit onto the neck of the
		Table-Top Stand and align the screw holes.

•Lift tile TV by placing your palm directly underneath the panel but do not:

•squeeze the speaker grill area

•place your fingers in the groove above the speaker grill area

•put stress on the LCD panel.

• Do not lift the TV from the bottom center.

6

•Do not put stress on the LCD panel or the frame around the screen.

•Be careful to not pinch your hands or the AC power

cord when you install the TV unit to the Table-TopStand.

4Use the supplied screws to attach the TV unit to the Table-Top Stand. Shown here with a three screw model; other models may require screwing four screws (refer to the "Attaching the Table-Top Stand" flyer).

If an electric

screwdriver is used, set the torque to tighten at

approximately 1.5 N.m, 15 Kgf.cm.