The TV starts searching for all available channels. This may take some time. Do not press any buttons on the TV or remote until it is completed.

Once all available channels have been stored, the TV returns to normal operation, displaying the channel stored on channel number 1.

Tip

If you press any of the buttons during auto-programming, auto-programming operation is canceled. To perform auto- programming again, activate “Initial Reset” in the “Setup” menu (page 38).

When a message appears for you to confirm the antenna connections

No channels are found. Check all the antenna connections and press to start auto-program again.

To change the order in which the channels are stored on the TV

See page 35.

Guide up-Start

17 GB