To connect

Do this

 

 

Digital satellite

Connect only to the HDMI IN

receiver or digital

jack. The digital video and audio

terrestrial receiver

signals are input from the digital

Dreceiver.

Tip

If the digital receiver has an HDMI jack, connecting via an HDMI cable will provide the best results.

Notes

•When using an HDMI-to-DVI cable or an adaptor, be sure to connect the DVI output connector first; then connect to the HDMI jack on the TV.

•The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p, 720p and 1080i. To connect a PC, use the PC IN jacks.

•Be sure to use only an HDMI cable that bears the HDMI logo.

DVD player with

Connect to the component jack

component output

1, 2 and the audio jacks

E1, 2. For better picture quality, component connection is recommended if your DVD player has a component output.

DVD recorder or

Connect to the video output jacks

VCR F

 

 

 

 

 

to record the image from the

 

 

 

 

 

 

 

 

 

 

 

TV. Connect to the audio output

 

 

jacks

 

 

to record to the sound

 

 

 

 

 

 

from the TV on the DVD recorder

 

or VCR. To turn off the sound of

 

 

the TV speakers, set “Speaker” to

 

“Off” (page 30).

 

 

 

 

 

 

 

 

 

 

 

Video game

Connect to the S video jack

1

equipment,VCR, or

or the video jack

1, 3 and the

DVD player

audio jacks

1, 3. To avoid

 

without component

picture noise, do not connect the

 

output GH

camcorder to the video jack

1

 

and the S video jack

1 at the

 

same time. If you connect mono

 

 

equipment, connect to the L

 

 

(MONO) jack

1, 3.

 

 

 

 

 

 

 

 

 

Hi-Fi audio

Connect to the audio output jacks

equipment I

 

 

 

 

to listen to the sound from the

 

 

 

 

 

TV on the Hi-Fi audio equipment.

To turn off the sound of the TV speakers, set “Speaker” to “Off” (page 30).

Programming the remote

If you have Sony VCRs/DVDs and Sony DVD Home Theater Systems/Amplifiers, do the following procedure to program the remote so that you can operate them using this remote.

Note

Before you start, look up the three-digit code for your equipment on page 44. For equipment that has more than one code, try with the first code number.

1

2

3

1

Optional Using

 

Equipment

1 Press and hold the DVD, VCR, or AMP function button you want to program on the remote and press the / button simultaneously.

The selected function button (DVD, VCR, or AMP) will flash.

2 Enter the three-digit code using the number buttons while the function button is lit. (approximately 10 seconds)

3 Press /-/-- or to complete the programming.

When the programming is done successfully, the selected function button will flash twice slowly, and if not, will flash five times quickly.

Continued

43 GB