Additional Information
Replacing the lamp
The projection lamp, which illuminates the picture, has a limited life.
If the screen becomes dark, the color looks unusual, “Projection lamp is nearing end of life. Please replace the lamp.” appears on the screen, or the LAMP indicator on the front of the LCD projection TV flashes, it is time to replace the lamp with a new one (not supplied).
This television uses a replaceable lamp as its light source. Over time, the screen will gradually grow darker as the lamp ages. Although rare, the lamp may make a small pop and will no longer light up. The lamp should be replaced after about 8,000 hours, which is the standard amount of time it takes for the lamp brightness to be reduced by half. Because the actual lamp life will vary depending on the operating conditions and environment, 8,000 hours is an estimate, not a guarantee.
WARNING
Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below.
•Use a Sony
•Do not remove the lamp for any purpose other than replacement. Doing so may cause injury or fire.
•Do not put flammable materials and metal objects inside the lamp receptacle of the TV after removing the lamp. Doing so may cause fire or electrical shock. Do not touch the lamp receptacle once the lamp has been removed.
•When the lamp eventually burns out, you may hear a noticeable pop sound. This is normal and it is inherent to this type of lamp.
•In rare instances, the bulb may pop inside the lamp unit, but the lamp unit is designed to contain all of the broken glass pieces inside the lamp unit.
CAUTION
Disposing of the lamp
This product contains mercury. For disposal or recycling information, please contact your local authorities.
Handling of the lamp
•Do not leave the used lamp near flammable materials or within the reach of children.
•Do not pour water onto the used lamp or put any object inside the lamp. Doing so may cause the lamp to burst.
1 Turn off the power on the main unit. Wait several minutes, then unplug the power cord.
(The cooling fan will continue to blow for about two minutes after turning the power off.)
2 Wait at least 30 minutes after unplugging the power cord to allow the lamp to cool down before replacing it. To avoid being burned, do not touch the lamp receptable once the lamp has been removed.
3 Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
Notes
•Do not shake the lamp. Vibration can damage the lamp or shorten its life.
•Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.
4 Remove the outside lamp cover. (Choose your model type A or B.)
A
B