• Do not keep the LCD projection TV plugged in if

you are not going to use it for several days. Even if

your LCD projection TV is turned off, it is still connected to AC power when plugged into an

outlet.

• Do not pull the power cord to disconnect the LCD projection TV. Pull it out by the plug.

Do not plug in too many appliances to the same power jack. Do not damage the power cord.

Do not place any objects on

the LCD projection TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

To prevent fire, keep

inflammable objects or naked lights (e.g. candles) away from the LCD projection TV.

If a snapping or popping sound from a TV set is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.

Give careful consideration to the environment when disposing of batteries.

Do not unplug or switch off the AC power outlet directly when the LCD projection TV is on.

Always switch off by pressing 1 (power) on the remote or the projection TV first to ensure proper lamp cooling process.

When not in use

If you will not be using the TV set for several days, the TV set should be disconnected from the outlet for environmental and safety reasons.

The TV set is not disconnected from the outlet when the TV set is switched off.

To disconnect the TV set completely, pull the plug from the outlet. However, some TV sets may have features which need the TV set to be left in standby to work correctly.

The instructions in this manual will inform you if this applies.

Carry the LCD projection TV in the specified manner

If you carry the LCD projection TV in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused. Be sure to follow the instructions mentioned below.

Carry the LCD projection TV with the specified number of persons (see

page 11).

Do not carry the LCD projection TV holding the speaker grill.

Hold the LCD projection TV tightly when carrying it.

Before carrying the LCD projection TV, disconnect any accessories or cables.

Do not carry the LCD projection TV

holding the screen edges.

Caution

Do not use the LCD projection TV at altitudes higher than 4,000 m, as doing so might cause malfunctions.

Cleaning

Clean the rear cover area of the LCD projection TV regularly. Dust in rear cover area may cause a problem with the cooling system of the LCD projection TV set.

To remove hard contamination, use a cloth moistened with a solution of mild detergent and water. Do not use a spray cleaning solution directly to the TV. It should only be used to moisten the cleaning cloth.

Clean the cabinet of the LCD

projection TV with a dry soft

cloth. To remove dust from the screen, wipe it gently with a soft cloth. Stubborn stains may

be removed with a cloth slightly dampened with a

solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning. If picture brightness decreases over time, it may be necessary to clean the inside of the LCD projection TV. Consult qualified service personnel.

Unplug the AC power cord when cleaning this unit. If not, it may result in electric shock.

Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ball point pen or a screw driver. This type of contact may result in a scratched screen.

Continued

5 GB