Video2(Component) TV Video

Selects the type of the video jack to be used from those on the left side of the TV.

Press M/m to select one of the following, then press .

Auto: Activates the component video jacks (Y, PB/CB, PR/CR), however, the composite video jack is selected when the component video jacks are not connected.

Off: Activates the composite video jack ().

Image Shift TV Video PC

Corrects the image on your TV.

Before adjusting

After adjusting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto (Factory setting): Automatically corrects double images.

Level 1-4: Aligns the images and improve the picture. The adjusted value tends to move strongly away from Level 1, and towards Level 4.

Cooling Mode TV Video PC

Selects “High” when you use the TV at an altitude of 1,500 m or higher.

Select “Normal” to use the TV at normal altitudes.

Press M/m to select “High”, then press .

Lamp Replacement TV Video PC

Selects this option after you replace the lamp.

When the lamp nears the end of its life, a message appears every time you switch on the TV.

Press </, arrow to select “Yes”, then Press .

Follow the on-screen procedure.

Notes

•Depending on environmental and other conditions, such as frequency of use, some lamps may burn out before the lamp replacement message appears on the screen.

•Until you set the Lamp Replacement option, a message announcing that the lamp is at the end of its life will appear every time you switch on the TV.

Cinema Drive TV Video

Provides an optimized display by automatically detecting the film content. Moving pictures will appear clearer and more natural-looking.

Press M/m to select “Auto”, then press .

Tip

You can select this option for NTSC system pictures only.

Functions MENU Using

37 GB