Installing and Connecting the LCD Projection TV

Connecting a DVD Player with A/V Connectors

Use this hookup if:

Your DVD player does not have component (Y, PB, PR) jacks.

If your DVD player has video component output connectors: for best picture quality use the connection described on page 37.

Disconnect all power sources before making any connections.

1 Using audio cables, connect the DVD player’s Audio OUT jacks to the LCD projection TV’s AUDIO IN jacks.

2 Using an S VIDEO cable, connect the DVD player’s S VIDEO jack to the LCD projection TV’s S VIDEO jack.

Rear of LCD projection TV

S VIDEO

DVD player

AUDIO-R (red) AUDIO-L (white)

RK-C310/C320/C330 (not supplied)

To take advantage of the Wide Screen modes, set the TV’s aspect ratio to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.

Use TV/VIDEO on the remote control to switch between the VCR, DVD player and cable TV inputs.

If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

38