Other Information

Programming the Remote Control

VCR/ SAT/ POWER

MUTING DVD CABLE

MODE

PICTURE WIDE

DISPLAY

JUMPENT

FAVORITESMENU

VCR/DVD

SAT/

TV

CABLE

 

 

FUNCTION

TV/VIDEO

FREEZE /TV/SAT ANT

GUIDE

VOL CH

CODE SET RESET SLEEP MTS/SAP

TV

RM-Y913

The remote control is preset to operate Sony brand video equipment.

Function

Equipment

Programmable Code

 

 

Number

 

 

 

VCR/DVD

Sony VCR

301

 

 

 

SAT/CABLE

Sony DSS tuner

801

 

 

 

If you have video equipment that you want to control with the LCD projection TV's remote control, use the following procedures to program the remote control.

✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.

From the “Manufacturer’s Codes” listed on page 87, select the three-digit code number for the manufacturer’s code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure.

1 Press CODE SET.

2 Press the desired FUNCTION button.

3 Input the three-digit manufacture's code number.

4 Press ENT.

✍When no code number is input for 30 seconds or invalid or incorrect numbers are input, the remote control is reset to the normal TV remote control mode.

Tips

❑If more than one code number is listed, try entering them one by one until you come to the correct code for your component.

❑If you enter a new code number, the code number you previously entered at that setting is erased.

❑In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component’s own remote control unit.

86