Installing and Connecting the LCD Projection TV

Connecting a Digital TV Receiver with component connectors

Disconnect all power sources before making any connections.

zBe sure to read the Set-top box manual.

1Using three separate component video cables, connect the Digital TV Set-top box’s Y, PB and PR jacks to the LCD projection TV.

✍The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound.

✍Component video connection is necessary to view 480i, 480p, 720p, and 1080i formats. You may also use the S VIDEO or Composite Video connections, however, component video (Y, PB, PR) will provide the best picture quality for all format types.

2Using an audio cable, connect the Digital TV Set-top box’s Audio OUT jacks to the LCD projection TV’s AUDIO IN jacks.

 

Y

 

 

PB

Rear of LCD projection TV

 

PR

VMC-10

 

(not supplied)

 

 

Digital TV Set-top box

 

AUDIO-R

AUDIO-L

RK-C310/C320/C330 (not supplied)

(red)

(white)

TV Projection LCD the Connecting and Installing

✍You cannot record the signal from any equipment connected into the Y, PB and PR connectors.

✍This LCD projection TV is not compatible with digital TV receivers configured with RGB or VGA output connectors.

39