Other Information
General
Problem | Possible Remedies |
How to restore Video settings | ❏ Press RESET on the remote control while in the Video Menu (see page 69). |
to factory settings |
|
|
|
How to restore Audio settings | ❏ Press RESET on the remote control while in the Audio Menu (see page 72). |
to factory settings |
|
|
|
Cannot cycle through the other | ❏ Be sure the Video Label option is not set to Skip (see page 83). |
video equipment connected to |
|
the TV |
|
|
|
Cannot operate Menu | ❏ If a menu option appears in gray, this indicates that the menu option is not |
| available. |
|
|
Lost password | ❏ In the password screen (see page 78), enter the following master password: 4357. |
| The master password clears your previous password; it cannot be used to |
| temporarily unblock channels. |
|
|
LED on the display unit is lit | ❏ The POWER/STANDBY LED lights up when the TV is turned on. If the LED |
| blinks continuously, this may indicate the TV needs a service. |
| ❏ The TIMER LED indicates that the timer is set. When the timer is set, this LED |
| will remain lit even when the LCD porjection TV is turned off. |
|
|
LCD projection TV is fixed to | ❏ Use Auto Program in the Channel menu to add receivable channels that |
one channel | are not presently in TV memory (see page 76). |
| ❏ Check your Channel Fix settings (see page 76). |
|
|
Information Other
97