Installing and Connecting the LCD Projection TV
Connection | Description |
1 AUX | Allows you to view local and cable channels if your cable |
| provider does not feature local channels. You can switch |
| between local and cable channels easily by pressing ANT |
| on the remote control. Devices connected to the AUX |
| input cannot be viewed in Twin View. |
2TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your LCD projection TV to switch between scrambled channels (through a cable box) and normal cable channels (CATV). Use this jack instead of a splitter to get better picture quality when switching between scrambled and unscrambled cable channels.
3 VHF/UHF | Connects to your VHF/UHF antenna or cable. |
|
|
4 S VIDEO | Connects to the S VIDEO OUT jack of your VCR or other |
(Rear and side) | S |
| picture quality than the VHF/UHF jacks or the Video IN |
| jack. |
|
|
5 VIDEO | Connects to the audio and video OUT jacks on your VCR |
(L/R)/AUDIO | or other video component. A fourth video input (VIDEO |
(Rear and side) | 2) is located on the side panel of the LCD projection TV. |
6HD/DVD IN (1080i, Connects to your DVD player’s or Digital
7 TV OUT | Connects to an AV receiver for greater control of all audio |
| and video equipment (see page 40). For detailed |
| information about connection, refer to the operating |
| manual supplied with the AV receiver. |
|
|
8 AUDIO OUT | Connects to the left and right audio inputs of your audio or |
(VAR/FIX) | video component. |
L (MONO)/R |
|
9CONTROL S To control other Sony equipment with the LCD projection
IN/OUT | TV's remote control, connect the CONTROL S IN jack of |
| the equipment to the CONTROL S OUT jack on the LCD |
| projection TV with the CONTROL S cable. |
| To control the LCD projection TV with a remote control |
| for another Sony product, connect the CONTROL S OUT |
| jack of the equipment to the CONTROL S IN jack on the |
| LCD projection TV with the CONTROL S cable. |
|
|
24