Installing and Connecting the LCD Projection TV

Connecting a Satellite Receiver with a VCR

Disconnect all power sources before making any connections.

1

2

3

4

5

Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

Connect the CATV cable to the VCR’s VHF/UHF IN jack.

Using a coaxial cable, connect the VCR’s OUT jack to the LCD projection TV’s VHF/UHF jack.

Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.

Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO IN jacks.

 

 

Satellite

Rear of LCD projection TV

 

antenna

 

Satellite receiver

cable

 

 

AUDIO-R (red)

S VIDEO

AUDIO-L (white)

 

VIDEO (yellow)

 

Cable

Coaxial cable

VMC-810S/820S

 

 

 

YC-15V/30V (not supplied)

 

 

 

(not supplied)

 

 

 

 

YC-15V/30V

(not supplied) VMC-810S/ 820S (not supplied)

VCR

✍Be sure your VCR’s video input is set correctly. Consult your VCR’s operating manual for instructions.

✍Use TV/VIDEO to select

-VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned on).

-VHF/UHF to watch cable TV.

✍If your VCR or satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

34