| Other Information |
|
|
Problem | Possible Remedies |
|
|
Dotted lines | ❏ Adjust the antenna. |
or stripes | ❏ Move the LCD projection TV away from noise sources such as cars, neon signs, or |
| |
|
|
LCD projection TV is fixed to | ❏ Use Auto Program in the Channel menu to add receivable channels that are not |
one channel | presently in TV memory (see page 63). |
| ❏ Check your Channel Fix settings (see page 63). |
|
|
Double images, ghosts, or | ❏ Use a highly directional outdoor antenna or a cable (when the problem is caused by |
merged colors | reflections from nearby mountains or tall buildings). |
| ❏ Set the Image Revision to an appropriate value. The default setting is Auto. If |
| ghosts, doubled images, or merged colors appear with Auto, select the best value |
| from 0 to 3 (see page 68). |
|
|
Cannot operate menu | ❏ If the item you want to choose appears in gray, you cannot select it. |
| ❏ Turn the LCD projection TV’s power off and on again. |
|
|
Cannot receive any channels | ❏ Use Auto Program in the Channel menu to add receivable channels that are not |
when using cable TV | presently in TV memory (see page 63). |
| ❏ Check your cable settings. |
| ❏ Make sure Cable is set to ON in the Channel menu (see page 62). |
|
|
Cannot gain enough volume | ❏ Increase the volume of the cable box using the cable box’s remote control. Then |
when using a cable box | press TV (FUNCTION) and adjust the LCD projection TV’s volume. |
Channel Index does not display ❏ Make sure Cable is set to ON in the Channel menu (see “Cable” on page 62).
all available channels❏ Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 63).
Cannot receive channels | ❏ Use Auto Program in the Channel menu to add receivable TV channels that are |
Unable to select a channel | not presently in TV memory (see page 63). |
| |
|
|
Lost password | ❏ In the password screen (see page 69), enter the following master password: 4357. |
| The master password clears your previous password; it cannot be used to |
| temporarily unblock channels. |
|
|
Cannot change channels with | ❏ Be sure you have not inadvertently switched your LCD projection TV from |
the remote control | channel 3 or 4 setting if you are using another device to change channels. |
| ❏ If you are using another device to control channels, be sure the “function” button |
| for that device has been pressed, or the slide switch is set correctly. For example, if |
| you are using your cable to control channels, be sure to press SAT/CABLE. |
|
|
Cannot cycle through the other | ❏ Be sure the Video Label feature has not been set to Skip (see page 68). |
video equipment connected to |
|
the LCD projection TV |
|
|
|
There is a black box on the | ❏ You have selected a text option in the Setup menu and no text is available. (see |
screen | page 67 to reset Setup selections) To turn this feature off, select OFF in the |
| Caption Vision option. If you were trying to get closed captioning, select CC1 |
| instead of Text |
|
|
Information Other
(Continued)
83