Other Information

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only).

Problem

Possible Remedies

 

 

No picture

Make sure the LCD projection TV’s power cord is connected securely to the wall

(screen not lit),

outlet.

no sound

Push the power button on the front of the LCD projection TV.

 

Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV,

 

and when watching connected equipment, set to VIDEO 1, 2, 3, 4, 5 or 6.

 

Try another channel. It could be station trouble.

 

The Parental Control feature is activated (see “Using the Parent Menu” on page

 

69).

 

If your LCD projection TV does not turn on, and a red light keeps flashing, your

 

LCD projection TV may need service. Call your local Sony Service Center.

 

 

Remote control

Batteries could be weak. Replace the batteries.

does not operate

Press TV (FUNCTION) when operating your LCD projection TV.

 

Make sure the LCD projection TV’s power cord is connected securely to the wall

 

outlet.

 

Locate the LCD projection TV at least 3-4 feet away from fluorescent lights.

 

Check the orientation of the batteries.

Dark, poor or no picture (screen lit), good sound

Adjust the Picture setting in the Video menu (see page 58).

Adjust the Brightness setting in the Video menu (see page 58).

Check antenna/cable connections.

It is strongly recommended to connect the antenna using a 75-ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it away as far as possible from the LCD projection TV.

Do not use an indoor antenna because it is especially susceptible to radio noise (see page 25).

Good picture,

Press MUTING so that “MUTING” disappears from the screen (see page 43).

no sound

Make sure Speaker is set to ON in the Audio menu (see page 61).

 

Check the MTS setting in the Audio menu (see “MTS” on page 61).

Cannot receive digital channels (when a DTV receiver is connected)

Check the connections between the DTV receiver and the LCD projection TV (see page 38).

Check your local listings to find out if you can receive digital broadcasts in your area.

Cannot receive upper channels

Change Cable to OFF (see page 62).

(UHF) when

Use Auto Program in the Channel menu to add receivable channels that are not

using an antenna

presently in TV memory (see page 63).

 

 

No color

Adjust the Color settings in the Video menu (see page 58).

 

 

Only snow and noise

Check the Cable setting in the Channel menu (see “Cable” on page 62).

appear on the screen

Check the antenna/cable connections.

 

Make sure the channel is broadcasting programs.

 

Press ANT to change the input mode (see page 46).

 

 

82