Installing and Connecting the LCD Projection TV

Connecting a DVD Player with Component

Video Connectors

This is the preferred hookup to use if:

❑Your DVD player has component (Y, B-Y, R-Y) jacks.

Disconnect all power sources before making any connections.

1 Using three separate component video cables, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the LCD projection TV. Use the HD/DVD IN 5 or 6 connections.

✍The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled Y, CB and CR, or Y, PB and PR. If so, connect the cables to like colors.

2 Using an audio cable, connect the DVD player’s Audio OUT jacks to the LCD projection TV’s AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video connection (HD/DVD IN 5 or 6).

PR

VMC-10HG (not supplied)

PB

 

Y

Rear of LCD projection TV

DVD player

AUDIO-R (red)

AUDIO-L (white)

RK-74A (not supplied)

✍To take advantage of the Wide Screen modes, set the TV’s aspect ratio to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.

36