Installing and Connecting the LCD Projection TV

Connecting a Digital TV Receiver

Disconnect all power sources before making any connections.

zBe sure to read the Set-top box manual.

1 Using three separate component video cables, connect the Digital TV Set-top box’s Y, PB and PR jacks to the LCD projection TV.

✍The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound.

✍Component video connection is necessary to view 480i, 480p, 720p, and 1080i formats. You may also use the S VIDEO or Composite Video connections, however, component video (Y, PB, PR) will provide the best picture quality for all format types.

2 Using an audio cable, connect the Digital TV Set-top box’s Audio OUT jacks to the LCD projection TV’s AUDIO IN jacks.

 

PR

VMC-10HG (not supplied)

PB

 

Y

Rear of LCD projection TV

Digital TV Set-top box

AUDIO-R (red)

RK-74A (not supplied) AUDIO-L (white)

✍

✍

You cannot record the signal from any equipment connected into the Y, PB and PR connectors.

This LCD projection TV is not compatible with digital TV receivers configured with RGB or VGA output connectors.

38