*
*Remote control of the
dSelecting the input source:
aSwitching the TV to the standby mode:
Press this button to temporarily turn off the
TV and switch it to the standby mode (the
/
(Standby/Sleep) indicator on the TV lights up in red). Press it again to switch on the TV from the standby mode.
To save energy, we recommend switching the TV off completely when the TV is not in use.
If no signal is received or no operation is performed in the TV mode for 10 minutes, the TV automatically switches to the standby
mode.
bSwitching the VCR or DVD on/off:
Press this button to switch your VCR or DVD on or off.
cSelecting the VCR, TV or DVD (Media Selector):
With this remote control you can operate not only this TV but also the main functions of your VCR or DVD.
Switch on the equipment you want to operate and press this button repeatedly to select VCR, TV, or DVD. The green light just above the selected equipment lights up momentarily.
An initial setup is required to synchronise this remote control to your VCR or DVD. This setup depends on the manufacturer. For more details, refer to “Remote Control Configuration for VCR/ DVD” on page 67.
Press this button repeatedly until the input symbol of the desired source appears on the screen.
eTurning on the Sleep Timer function:
Press this button to set the TV to automatically switch to the standby mode after a specified time period. For more details, refer to “Sleep Timer Function” on page 45.
fSelecting channels:
Press this button to select channels.
For
ga) If the TV is selected:
Press this button to watch the last channel selected (the last channel watched for at least five seconds).
b) If the VCR is selected:
For Sony’s VCR
3buttons.
hSelecting a screen format:
Press this button repeatedly to change the screen format. For more details, refer to “Screen Control” on page 36.
22Overview