This TV is equipped with a
GB
/ (Standby/Sleep) indicator (flashing in red)
1 Measure how long the / (Standby/Sleep) indicator flashes and stops flashing.
For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.
2 Press the & (Power) switch on the TV to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (duration and interval).
Trouble symptoms and remedies
•Here are some simple solutions to problems which may affect the picture and sound.
•If you continue to experience problems, have your TV serviced by qualified service personnel. Never open the casing yourself.
Problem | Possible remedies |
| |||||||
No picture |
|
|
|
|
|
|
|
| |
| No picture (screen is dark) and no sound | • Check the aerial connection. |
| ||||||
|
| • Connect the TV to the mains, and press the & (Power) switch | |||||||
|
|
| on the TV. |
|
|
|
| ||
|
| • | If the | / |
| (Standby/Sleep) indicator lights up in red, | |||
|
|
| press TV &/ |
| on the remote control. |
| |||
|
|
|
|
|
|
|
|
|
|
| The TV turns off automatically (the TV | • Check if the Sleep Timer function is activated (page 45). | |||||||
| enters the standby mode). | • If no signal is received or no operation is performed in the TV | |||||||
|
|
| mode for 10 minutes, the TV automatically switches to the | ||||||
|
|
| standby mode. |
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
| No picture or no menu information from | • | Check that the optional equipment is on and press |
|
| / | |||
|
| ||||||||
| equipment connected to the Scart |
| on the remote control repeatedly until the correct input |
| |||||
| connector |
| symbol is displayed on the screen. |
| |||||
|
| • Check the connection between the optional equipment and | |||||||
|
|
| the TV. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(continued)
Additional Information 71