Manual Programme Preset
The “Manual Programme Preset” option
A)Preset channels, one by one, in the programme order of your choice.
To do this:
1After selecting this option, press 
.
2Highlight the Programme option and press 
.
3Press 
or 
to select a programme number for which you want to preset the channel, then press 
. If you do not want to preset other
options for the channel, press OK instead of 
and go to step 8.
4After selecting the System option, press 
.
Depending on the country/region you have selected in the
“Country” option, this option may not be available (seeGB page 41).
5Press 
or 
to select the TV Broadcast system (B/G for western European countries/regions, D/K for eastern European countries/ regions, I for the United Kingdom, or L for France), then press 
. If you do not want to preset other options for the channel, press OK
instead of 
and go to step 8.
6After selecting the Channel option, press 
.
7Press 
or 
to select the type of channel to be tuned (S for cable
channels or C for terrestrial channels), then press 
.
After that, press the number buttons to enter the channel number of
the TV Broadcast directly. If you do not know the channel number,
press 
or 
to search for it.
When you have tuned the desired channel, press OK.
8Highlight the Confirm option and press OK. Then press 
to select OK and finally press OK to store your channel selection.
Repeat all the above steps to tune and store other channels.
B)Label a channel using up to five characters (letters or numbers).
To do this:
1Press PROG +/– to select the programme number with the channel you want to name.
You cannot select the programme number set to skip in the “Skip” option (see step D on page 44).
2When the programme you want to name appears on the screen, select
the Label option and press 
.
3Press 
/
/ 
or 
to select the first character, then press OK.
4When you have finished, press 
/
/ 
or 
to select the word “End” on the screen and press OK to exit the character input screen.
•If you input a wrong character, select the character using 
or 
on
the screen. Then press 
/
/ 
or 
to select the correct character and press OK.
•For a blank, select 
on the screen and press OK.
(continued)
Menu System 43