Installing and Connecting the TV

Connecting a DVD Player with Component Video Connectors

This is the preferred hookup to use if:

• Your DVD player has component (Y, B-Y, R-Y) jacks.

Disconnect all power sources before making any connections.

1 Using three separate component video cables, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections.

Tip

The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, PB and PR. If so, connect the cables to the matching colors.

2 Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks.

Note

The Y, B-Y and R-Y jacks do not provide audio, so audio cables must be connected to provide sound.

Rear of TV

VHF/UHF

R-AUDIO-L VIDEO S VIDEO

AUDIO

B

R

R

L

DC IN 14.5V

 

VIDEO 1 IN

 

3 IN

 

AUDIO OUT

 

AUDIO-R (red)

PR

AUDIO-L (white)

PB

 

 

Y

RK-74A (not supplied)

Tips

VMC-10HG (not supplied)

DVD player

•To take advantage of the Wide Screen Modes, set the TV’s aspect ratio to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.

•Some DVD players are equipped with the three component video connectors: Y - Green, PB (CB, Cb or B-Y) - Blue and PR (CR, Cr or R-Y) - Red.

16