Connect the CATV cable to the VCR’s IN jack.

Installing and Connecting the TV

Connecting a VCR and Cable TV

Use this hookup if:

• You have cable TV that does not require a cable box.

Disconnect all power sources before making any connections.

1

2 Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.

3 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

Rear of TV

75-ohm coaxial

75-ohm coaxial

cable (supplied)

cable (supplied)

 

S VIDEO

VCR

VIDEO (yellow)

 

AUDIO-L (white)

Cable

 

 

AUDIO-R (red)

S VIDEO cable

 

(not supplied)

 

AUDIO cable (not supplied)

Note

To watch the pictures input from the S VIDEO input jack, set “Auto YC” to “On” in the (Setup) menu (See below).

Tips

You can also use the VIDEO 2 IN jacks to connect your VCR.

If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

When connecting both VIDEO OUT and S VIDEO OUT

You can select the jack the TV receives the input signal from on the menu screen.

The TV is factory set to receive S VIDEO input signals.

1Press TV/VIDEO repeatedly to select VIDEO 1 IN.

2Press MENU.

3 Press V/v to select

(Setup), then press

.

4Press V/v to select “Auto YC,” then press .

5To watch the pictures input from the S VIDEO input jack:

Press V/v to select “On,” then press .

To watch the pictures input from the VIDEO input jack:

Press V/v to select “Off,” then press .

6Press MENU to exit the menu screen.

12