Installing and Connecting the TV

Connecting a DVD Player with Component Video Connectors

This is the preferred hookup to use if:

• Your DVD player has component (Y, B-Y, R-Y) jacks.

Disconnect all power sources before making any connections.

1 Using a component video cable, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections.

Note

This TV supports only the 480i and 480p signal format. If the TV receives a signal other than 480i or 480p, “Non Supported Video Format” appears on the screen.

Tip

The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, PB and PR. If so, connect the cables to the matching colors.

2 Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks.

Note

The Y, B-Y and R-Y jacks do not provide audio, so audio cables must be connected to provide sound.

Rear of TV

Y

PB

PR

AUDIO-L

 

AUDIO cable

 

Component

 

 

 

(white)

 

(not supplied)

 

video cable

AUDIO-R

 

 

 

(not supplied)

(red)

DVD player

Tips

•To take advantage of the Wide Screen Modes, set the TV’s aspect ratio to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.

•Some DVD players are equipped with the three component video connectors: Y-Green, PB (CB, Cb or B-Y) -Blue and PR (CR, Cr or R-Y) -Red.

16